Martin RoboColor III Betriebsanweisung PDF herunterladen (Seite 53)

Gobos

[gobo]

Press [gobo] once to access the color setting mode. The status of

the display now changes to {YGoX}, where X is a number between

0 and 9, to indicate the selected gobo, and Y is either 1, 2 or A,

indicating which gobo wheel your are controlling (A = both).

[↑]/[↓]

Press [↑]or[↓] to select which color wheel(s) you want to control.

[up]/

[down]

Move the joystick up or down to change the gobo. You will see that

the status of the display changes accordingly.

[left]/

[right]

Move the joystick left or right to split the beam into two neighbouring

gobos. The display shows the nearest gobo.

[gobo]

Press [gobo] again to quit the gobo setting mode.

Strobing

[shut] +

[up]/

[down]

Both the gobo wheels have a blackout position which can be used

to create strobe effects. Press the [shut] key and keep it pressed

whilst moving the joystick up and down to change the strobe rate.

As you move the joystick up and down you will see that the display

changes between {Shu0} and {Shu6}, indicating the strobe rate.

{Shu0} indicates that the strobe is disabled. {Shu6} is the slowest

strobe rate. The gobo wheel will always strobe between the blackout

and the open gobo, thereby overriding any previously programmed

gobo.

Movement Speed

[speed]

Press [speed] to access the movement speed setting of the mirror

drum. The status in the display now changes to {SPEX}, where X is

number between 1 and 8 indicating the movement speed.

[left]/

[right]

Move the joystick left or right to change the movement speed of the

mirror drum. You will see that the status of the display changes

accordingly.

[up]/

[down]

Move the joystick up or down to change access the speed setting of

the color wheels. The status of the display now changes to {YSPX}

where X is a number between 1 and 8, indicating the speed, and Y

is either 1, 2 or A, to indicate which color wheel your are controlling

(A = both).

[↑]/[↓]

Press [↑]or[↓] to select which color wheel(s) you want to control.

[up]/

[down]

Move the joystick up or down to change the movement speed of the

color wheel(s) You will see that the status of the display changes

accordingly.

[speed]

Press [speed] a again to quit the speed mode.

Page 54 Version 2.1/3.1 Martin 2308 Controller

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare

Martin RoboColor III Betriebsanweisung Seite 53

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flutlichter Martin RoboColor III