Martin RoboColor III Betriebsanweisung Seite 15

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 61
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 14
can leave the loop number unchanged by pressing [enter], or, change it by first moving
the joystick up or down and then and pressing [enter] when satisfied.
5 Either way, you automatically proceed to the next step of the show. Repeat step 3 and
4 above to edit the rest of the show.
6 Finally, press [edit show] to save the show.
Insert sequence in show
To insert an extra
sequence
between existing steps in a
show
follow the procedure
described above. However, instead of selecting a new sequence, push the joystick up until
the display shows {InS_} and then press [enter] to insert a new step before the step you
were in. By default, the
sequence
that was programmed at this position is used again and
you must scroll to another
sequence
with the joystick or your
show
will contain a duplicate
step. Please note that you cannot insert a step if all 255 steps in the
show
are used.
Delete sequence from show
To delete an existing step in a
show
follow the procedure described above. However,
instead of selecting a new sequence, push the joystick down until the display shows {dEl_}
and then press [enter] to delete the step. You cannot delete a sequence if you have only
1 step in the
show -
use delete
show
instead.
Delete show
To delete a show, enter edit-show mode as you would if you were about to edit the same
show by pressing [edit show] and selecting the required
show number
followed by [enter]
so that the display reads {Pr.oX}, where X is the show number. If you want to delete the
show
press [edit show] so that {dEoX} starts flashing in the display. Press [] and [] at the
same time to confirm that you wish to delete the show. The
show
is now deleted and you
are ready to select a new
show
.
Page 16 Version 2.1/3.1 Martin 2308 Controller
Seitenansicht 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare