Martin RoboColor III Betriebsanweisung PDF herunterladen (Seite 33)

Movement

[up]/

[down]/

[left]/

[right]

Mirror positions are programmed when no other programmable

feature is selected. That is when the display shows the current

sequence and scene number. To program a movement simply move

the joystick up, down, left and right. If you have configured the

controller with acceleration factor during the set-up, you will see

that, when moving the joystick in one direction and keeping it there,

the mirror starts moving with a slow speed and then accelerates

until full speed is obtained. This feature allows you to program

accurate positions in a quick way.

Colors

[color]

Press [color] once to access the color setting. The status of the

display now changes to {Co_X}, where X is a number between 1

and 18, indicating the selected color.

[up]/

[down]

Move the joystick up or down to change the color. You will see that

the status of the display changes accordingly.

[left]/

[right]

Move the joystick left or right to split the beam into two neighbouring

colors. The display shows the nearest color.

[color]

Press [color] again to quit the color setting.

Gobos

[gobo]

Press [gobo] once to access the gobo setting. The status of the

display now changes to {Go_X}, where X is a number between 1

and 18, indicating the selected gobo.

[up]/

[down]

Move the joystick up or down to change the gobo. You will see that

the status of the display changes accordingly.

[left]/

[right]

Move the joystick left or right to split the beam into two neighbouring

gobos. The display shows the nearest gobo.

[gobo]

Press [gobo] again to quit the gobo setting.

Page 34 Version 2.1/3.1 Martin 2308 Controller

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare

Martin RoboColor III Betriebsanweisung Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flutlichter Martin RoboColor III