Martin MX SERIES Bedienungsanleitung PDF herunterladen (Seite 20)

Basic service

ASIC

SERVICE

The MX-4 requires simple routine maintenance. The maintenance schedule

depends heavily on the operating environment; please consult a Martin service

technician for recommendations.

Any service procedure not described here should be referred to a qualified

technician.

Important! Excessive dust, grease, and smoke fluid buildup degrades

performance and causes overheating and damage to the fixture

that is not covered by the warranty.

Warning! Disconnect the fixture from AC power before removing any

cover.

CLEANING

To clean optical components

Use care when cleaning optical components. The surface of the color filters is

fragile and small scratches may be visible.

1 Disconnect the fixture from AC power and allow the components to cool

completely.

2 Remove the top cover bolts with a 4 mm Allen wrench and lift off the cover.

3 Blow or vacuum away loose dust. Remove residues from lenses and filters with

a soft cloth or cotton swabs wetted with isopropyl alcohol. Regular glass

cleaner may also be used, but no residues may remain.

4 Rinse with distilled water. Mixing the water with a small amount of wetting

agent such as Kodak Photoflo will help prevent streaking and spotting.

5 Dry with a clean, soft and lint-free cloth or blow dry with compressed air.

6 Replace the top cover.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Keine Kommentare

Martin MX SERIES Bedienungsanleitung Seite 20