Martin MX SERIES Bedienungsanleitung PDF herunterladen (Seite 14)

DMX operation

To connect the data link

1 Connect a data cable to the controller’s data output. If the controller has a 5-pin

output, use a 5-pin male to 3-pin female adaptor cable (P/N 11820005).

2 Lead the data cable from the controller to the first fixture and plug it into the

data input.

3 Connect the output of the fixture closest to the controller to the input of the

next fixture. If connecting to a fixture with reversed-polarity (pin 3 cold), insert

a phase-reversing cable between the two fixtures.

4 Continue connecting fixtures output to input. Up to 32 devices may be

connected on a serial link.

5 Terminate the link by inserting a male termination plug (P/N 91613017) into the

data output of the last fixture. A termination plug is simply an XLR connector

with a 120 ohm, 0.25 W resistor soldered across pins 2 and 3.

1-CHANNEL DMX OPERATION

The 1-channel DMX mode provides simple remote activation of the MX-4’s stand-

alone programs plus blackout and strobe functions. The 1-channel functions are

shown in Table 5. Each fixture runs its own program and therefore cannot be

synchronized with other fixtures.

DMX value Percent Function

0 - 10

11 - 20

21 - 80

81 - 115

116 - 140

141 - 175

176 - 210

211 - 255

0 - 4

5 - 7

8 - 31

32 - 45

46 - 55

56 - 68

69 - 82

83 - 100

Blackout (light off)

Shutter open (light on)

Strobe

Stand-alone action with slow music trigger

Stand-alone action with medium music trigger

Stand-alone action with fast music trigger

Stand-alone action with random music trigger

Manual trigger area, crossover at 240 (94%)

Table 4: 1-channel DMX functions

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Martin MX SERIES Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flutlichter Martin MX SERIES