Martin MX SERIES Bedienungsanleitung PDF herunterladen (Seite 10)

Stand-alone operation

TAND

ALONE

OPERATION

CUSTOM SETTINGS

Stand-alone operation may be customized with the settings in Table 3. The options

may be combined and are set using DIP-switch pins 1 - 10. Changes may not take

effect until after the fixture has been turned off and on.

SINGLE FIXTURE OPERATION

When there is no control signal at the data input for 5 seconds, the MX-4

automatically goes into stand-alone mode regardless of the DIP-switch setting. It

uses music trigger unless stand-alone mode is enabled and auto trigger is selected.

To operate 1 fixture in stand-alone mode

1 Disconnect the fixture from power and data.

2 (Optional) Set DIP-switch pins 2 and 10 to ON. Set pin 3 to OFF. Select stand-

alone options as listed in Table 3.

3 Apply power.

When you apply power, the option settings take effect and the lamp strikes. Note: A

hot lamp must cool for several minutes before it can be restruck. If the lamp does

Mode Effect Pin setting (0 = OFF, 1 = ON)

12345678910

single / master

auto trigger 0

10 00001

music trigger 1

slow pan/tilt 1

wide pan/tilt 1

slave

inverted color

00000

inverted gobo 1

inverted tilt 1

inverted pan 1

Table 3: Custom stand-alone settings

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Keine Kommentare

Martin MX SERIES Bedienungsanleitung Seite 10