Martin MX SERIES Bedienungsanleitung PDF herunterladen (Seite 15)

DMX operation

6/7 CHANNEL DMX OPERATION

The 6-channel DMX mode provides position control of all effects plus speed

control of the moving mirror. The optional 7-channel mode adds speed control of

the color and gobo wheels.

Lamp power Lamp power can be switched on and off from the controller. When set up for 6- or

7-channel DMX operation, the lamp remains off until a lamp-on command is sent.

Note: A peak of electric current many times the operating current is drawn briefly

when striking a lamp. Striking many discharge lamps at once may cause a voltage

drop that prevents lamps from striking or trips circuit breakers. When striking

multiple fixtures, space lamp-on commands at 5 second intervals.

A hot lamp must be allowed to cool for several minutes before it can be turned back

on. To prevent accidental lamp-off commands, a lamp-off can be executed only

when channel 2 and 3 are set to full.

If a hot lamp does not strike, send the lamp-off command and wait several minutes

before trying again.

Reset All effects can be reset to their index positions from the controller. The reset

command must be sent for 5 seconds before it takes effect.

Shutter The shutter opens, closes, and strobes at variable rates from 1.5 to 13.5 Hz.

Stand-alone When stand-alone with music or auto trigger is selected on channel 1, the mirror

moves to random positions using the selected trigger. The color and gobo wheels

can be controlled normally, or, by setting their control channels to full, they can be

set to operate in stand-alone mode as well.

Colors The color wheel provides 15 full-color filters, 2 split-color filters, and an open

position. The wheel may be positioned between 2 positions for additional split-

color effects. Movement speed can be controlled on channel 7, if enabled.

For stand-alone color action, set channel 2 to a value from 210 to 255 and set

channel 1 to stand-alone with music or auto trigger.

Gobos The gobo wheel provides 19 gobos and an open position. Movement speed can be

controlled on channel 7, if enabled.

For stand-alone gobo action, set channel 3 to a value from 240 to 255 and set

channel 1 to stand-alone with music or auto trigger.

Pan and tilt The mirror pans 230° and tilts 76.5°. Movement speed is controlled on channel 6,

allowing you to program fades on controllers without cross-fader. If your controller

has cross-faders, and you use them, set channel 6 to the “tracking” speed for best

results.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Keine Kommentare

Martin MX SERIES Bedienungsanleitung Seite 15