Martin MAC 2000 Wash Bedienungsanleitung PDF herunterladen (Seite 4)

4 MAC 2000 Wash

NTRODUCTION

Thank you for selecting the MAC 2000 Wash. The MAC 2000 Wash is a 1200 Watt moving head wash light that

provides CMY color mixing, color correction (CTC), two color wheels (each with four removable colors), a combined

dimmer/shutter. 540° of pan, and 267° of tilt. A motorized barn-door system is available as a separately orderable

accessory.

The MAC 2000 Wash has a Fresnel lens fitted as standard, and is also supplied with a PC lens and a super-wide-angle

lens. A motorized zoom provides a beam angle ranges of 11° through to 40° (in the standard Fresnel configuration),

12° through to 34° (with the PC lens fitted), or 66° through to 80° (with the super-wide-angle lens fitted).

The MAC2000 Wash is fitted with an electronic ballast that provides flicker-free operation and an economic

power-saving mode. It also has a switch mode power supply allowing it to 'auto sense' and automatically adjust for the

local electrical power.

For the latest firmware updates, documentation, and other information about this and all Martin Professional products,

please visit the Martin web site at http://www.martin.dk.

MAC 2000 Wash safety information

Warning! This product is for professional use only. It is not for household use.

This product presents risks of lethal or severe injury due to fire and heat, electric shock, ultraviolet radiation, lamp

explosion, and falls. Read this manual before powering or installing the fixture, follow the safety precautions listed

below and observe all warnings in this manual and printed on the fixture. If you have questions about how to operate

the fixture safely, please contact your Martin dealer or call the Martin 24-hour service hot line at +45 70 200 201.

PROTECTION FROM ELECTRIC SHOCK

• Disconnect the fixture from AC power before removing or installing the lamp, fuses, or any part, and when not in use.

• Always ground (earth) the fixture electrically.

• Use only a source of AC power that complies with local building and electrical codes and has both overload and

ground-fault protection.

• Do not expose the fixture to rain or moisture.

• Refer any service operation not described in this manual to a qualified technician.

PROTECTION FROM UV RADIATION AND LAMP EXPLOSION

• Never operate the fixture with missing or damaged lenses and/or covers.

• When replacing the lamp, allow the fixture to cool for at least 15 minutes before opening the fixture or removing the

lamp. Protect your hands and eyes with gloves and safety glasses.

• Do not stare directly into the light. Never look at an exposed lamp while it is lit.

• Replace the lamp if it becomes defective or worn out, or before usage exceeds the maximum service life.

PROTECTION FROM BURNS AND FIRE

• Never attempt to bypass the thermostatic switch or fuses. Always replace defective fuses with ones of the specified

type and rating.

• Keep all combustible materials (for example fabric, wood, paper) at least 1 meter (39 inches) away from the fixture.

Keep flammable materials well away from the fixture.

• Do not illuminate surfaces within 3 meters (10 feet) of the fixture.

• Provide a minimum clearance of 0.1 meters (4 inches) around fans and air vents.

• Never place filters or other materials over the lens.

• The exterior of the fixture can get very hot. Allow the fixture to cool for at least 5 minutes before handling.

• Do not modify the fixture or install other than genuine Martin parts.

• Do not operate the fixture if the ambient temperature (Ta) exceeds 40° C (104° F).

1 2 3 4 5 6 7 8 9 ... 40 41

Kommentare zu diesen Handbüchern

Keine Kommentare

Martin MAC 2000 Wash Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flutlichter Martin MAC 2000 Wash