Martin MAC 600E Bedienungsanleitung PDF herunterladen (Seite 19)

Optical configurations

Snoot

The snoot may be installed to reduce light spill to the sides.

To install the snoot

1 Bend the tabs 90°.

2 Bend the ring into a circle with the tabs on the outside. Weave the end tab through the 3 slots.

3 Insert the tabs between the 3 pairs of pins between the lens and the head cover.

Diffuser filter

The MAC 600 (E) NT includes a removable diffuser filter that provides a flatter field and superior color uniformity.

For special applications, a 90 x 90 mm glass color filter may be installed in place of the diffuser.

To remove or install the diffuser filter

1 Disconnect the fixture from AC power and allow it to cool.

2 Unlatch and remove the front section of the head.

3 Remove the screw, washer, and retention spring from each end of

the filter holder as shown. Lift off the holder and filter.

4 Replace the filter holder or store it with the filter.

5 Filter installation is the reverse. Turn the diffuser glass so that the

textured side is away from the lamp.

123

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Keine Kommentare

Martin MAC 600E Bedienungsanleitung Seite 19