Martin MiniMAC Maestro Bedienungsanleitung PDF herunterladen (Seite 25)

Fixture settings 25

DMX Protocol settings

These are described in “Preparing a fixture for DMX control” on page 46.

Refer to this section if you will be operating the Exterior 600 with a DMX

control device.

Automatic lamp on

When the Automatic Lamp On personality is on, the fixture turns on the

lamp within 90 seconds of power on. When set to Off (the default setting), a

lamp-on command is required to turn on the lamp.

MC-X lamp off

By choosing the option MCX Preset 7 Key from the MCX Lamp off field

you enable button 7 on an MC-X controller to be used to control the lamp off

function.

Auto shutter B/O

The shutter will “assist” the dimmer black out (On=default) or will not be

affected by the dimmer setting (Off)

Effect speed

This setting determines whether effects begin to change quickly (Fast) or

slowly (Safe). Early models were set to Fast by default, but Safe is now the

default setting. To optimize effect precision and component life, we

recommend that effect speed is always set to Safe.

Effect shortcuts

If set to On, the CMY effects take the shortest path to the next position,

passing the open position if necessary. If set to Off, the CMY effects avoid

passing the open position so that cyan, magenta and/or yellow are never

completely removed from the light output during scene changes. Shortcuts

are set to On by default.

Effect feedback

Effect feedback is a real-time position correction system that automatically

corrects the position of the effect wheels. This is On by default.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 83 84

Keine Kommentare

Martin MiniMAC Maestro Bedienungsanleitung Seite 25