Martin MiniMAC Maestro Bedienungsanleitung PDF herunterladen (Seite 19)

Data link 19

Adaptors

Adaptors may be required to connect the Exterior 600 to the controller or

other 5-pin devices. Adaptor cables for indoor use are available from Martin.

The adaptor cables are wired as shown below.

Splitter/Amplifiers

A device such as the Martin 4-Channel Opto-Isolated RS-485

Splitter/Amplifier may be used to branch the data link and/or extend its

length. Do not use a “Y” connector to split the link.

Terminators

Termination of the data link is required for trouble-free communication. For

temporary installations, this can be achieved with an IP65 weatherproof

male termination plug inserted into the data output cable of the last fixture in

each chain. A termination plug is simply an XLR connector with a 120 ohm

resistor soldered across pins 2 and 3.

For permanent terminations, the link can be terminated inside the last fixture

in each chain, using a 120 ohm, 0.25 watt resistor (available from your

Martin Architectural dealer: P/N 04150308) across the hot and cold data

Adaptor

Male Female

5-pin to 3-pin

P/N 11820005

Adaptor

Male Female

3-pin to 5-pin

P/N 11820004

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 83 84

Keine Kommentare

Martin MiniMAC Maestro Bedienungsanleitung Seite 19