Martin CX-2 Bedienungsanleitung PDF herunterladen (Seite 4)

4 Introduction CX-2 user manual

To protect yourself and others from burns and fire

• Never attempt to bypass the thermostatic switch or fuses. Always replace

defective fuses with ones of the specified type and rating.

• Keep all combustible materials (for example fabric, wood, paper) at least 0.1

meters (4 inches) away from the fixture. Keep flammable materials well away

from the fixture.

• Replace the lamp if it becomes defective or worn out. When replacing the lamp,

allow the fixture to cool for at least 5 minutes before opening the fixture or

removing the lamp. Protect your hands and eyes with gloves and safety glasses.

• Do not illuminate surfaces within 0.3 meters (12 inches) of the fixture.

• Provide a minimum clearance of 0.1 meters (4 inches) around fans and air vents.

• Never place filters or other materials over the lens.

• The exterior of the fixture can reach temperatures up to 65° C (149° F). Allow the

fixture to cool for at least 5 minutes before handling.

• Do not modify the fixture or install other than genuine Martin parts.

• Do not operate the fixture if the ambient temperature (Ta) exceeds 40° C (104° F).

To protect yourself and others from injury due to falls

• When suspending the fixture above ground level, verify that the structure can hold

at least 10 times the weight of all installed devices.

• Verify that all external covers and rigging hardware are securely fastened and use

an approved means of secondary attachment such as a safety cable.

• Block access below the work area whenever installing or removing the fixture.

UNPACKING

The packing material is carefully designed to protect the fixture during shipment -

always use it to transport the fixture.

The CX-2 comes with:

• 1 3-meter, 3-wire IEC power cable

• 1 user manual

1 2 3 4 5 6 7 8 9 ... 23 24

Keine Kommentare

Martin CX-2 Bedienungsanleitung Seite 4