Martin CX-2 Bedienungsanleitung PDF herunterladen (Seite 16)

16 Operation CX-2 user manual

The single-channel functions are shown below.

STAND-ALONE OPERATION

The CX-2 automatically operates in stand-alone mode with music trigger if there

is no control signal.

Operation can be modified using the special settings described on page 12. To

enable the special settings, DIP-switch pin 10 must be ON.

Important! The fixture transmits control signals on the data link when

operated in stand-alone mode (with DIP-switch pins 2 and 10

ON). To prevent damage to the electronics, do not connect a

stand-alone fixture to other stand-alone fixtures or to a

controller.

MASTER / SLAVE OPERATION

Multiple CX-2s can be connected together, without a controller, for synchronized

“master/slave” operation in which the slave fixtures mimic the behavior of the

master fixture.

To connect units for master / slave operation

1 Disconnect all fixtures from AC power.

2 Connect the output of one CX-2 to the input of the next CX-2.

3 Connect additional CX-2s output to input. Up to 32 may be connected.

4 Terminate the link on both ends by inserting a female termination plug into

the data input of the first fixture and a male termination plug into the data

output of the last fixture. A termination plug is simply an XLR connector with

a 120 ohm, 0.25 W resistor soldered across pins 2 and 3.

DMX value Percent Function

0 - 10

11 - 20

21 - 80

81 - 115

116 - 140

141 - 175

176 - 210

211 - 255

0 - 4

5 - 7

8 - 31

32 - 45

46 - 55

56 - 68

69 - 82

83 - 100

Blackout (light off)

Open (light on)

Strobe

Random action with slow music trigger

Random action with medium music trigger

Random action with fast music trigger

Random action with random music trigger

Manual trigger area, crossover at 240 (94%)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Martin CX-2 Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flutlichter Martin CX-2