Martin MAC 700 PROFILE Bedienungsanleitung PDF herunterladen (Seite 6)

6 MAC 700 Wash

Introduction

Thank you for selecting the Martin

MAC 700 Wash. This moving-head washlight features:

• 700 watt short-arc high-output discharge lamp with hot restrike

• full-range mechanical dimmer/shutter

• seamless CMY color mixing

• 5500 - 2800 K variable 0 - 100% color temperature correction

• color wheel with 8 replaceable filters (6 colors, 3200 - 4100 CTC and UV transmitter) plus open

• continuous and indexable rotating beam shaper

• 5:1 (12.5° - 66°) zoom

• 540° of pan and 246° of tilt with position correction system

• electronic “flicker-free” ballast

• auto-sensing switch-mode power supply

• clip-in/clip-out modular construction for fast service and maintenance with minimum fixture downtime

For the latest firmware updates, documentation, and other information about this and all Martin Professional

products, please visit the Martin website at http://www.martin.com

Comments or suggestions regarding this document may be e-mailed to [email protected] or posted to:

Service Department

Martin Professional A/S

Olof Palmes Allé 18

DK-8200 Aarhus N

Denmark

Warning! Read the safety precautions at the front of this manual before installing, operating or

servicing the fixture.

Unpacking

The MAC 700 Wash is packaged in either a cardboard box or a two-unit flight case that is designed to

protect the product during shipment. The following items are included:

• OSRAM HTI 700/D4/75 lamp (installed)

• 2 clamp attachment brackets

• this user manual

• one 10 AT fuse (installed) for use with 208 - 240 V power

• one 15 AT fuse for use with 100 -120 V power

Using for the first time

Before applying power to the fixture:

• carefully review “Safety information” on page 3

• check that the main fuse in the fuseholder between the main on/off switch and the power cable matches

the local AC power voltage as described in “Power supply and main fuse” on page 7

• install a plug on the power cable as described in “Power connection” on page 7

• unlock the tilt lock as described on page 20.

When powered up, check lamp alignment as described on page 9.

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Keine Kommentare

Martin MAC 700 PROFILE Bedienungsanleitung Seite 6