Fixture Settings
1 4
Manual control
The manual control menu (
MAN
) permits limited operation from the control panel.
• To reset the fixture, select
RST
.
• To turn the lamp on or off, select
L
ON
or
LoFF
.
• To open, close, and strobe the shutter at 3 speeds, select
SHUT
.
• To control the dimmer, select
dIM
.
• To move the color wheel to each position and scroll it at 3 speeds, select
COL
.
• To control the CMY mix, select
CYAN
,
MAG
, and
YEL
.
• To insert the frost filter, select
FROS
.
• To control pan and tilt, select
PAN
and
TILT
.
Adjustment control and calibration
The adjustment menu (
AdJ
) provides the following functions:
• Reset the fixture (
RST
)
• Turn on and off the lamp (
L
ON
,
LoFF
)
• Disable pan/tilt feedback (
FEbA
)
• Control effects in the head (
HEAd
)
• Move the head to the home and extreme positions (
PATI
)
• Calibrate effects (
CAL
)
Head effects adjustment
The head submenu (
AdJ
/
HEAd
) provides manual control when making mechanical adjustments, which must be
performed by a qualified technician. It allows the technician to:
• Open, close, and strobe the dimmer/shutter
• Move the color wheel to the open, sensor, and full color positions
• Move the CMY wheels to the open, sensor, and full positions
• Insert and remove the frost filter
Calibration
The calibration submenu (
AdJ
/
CAL
) allows you to adjust the effects for uniformity between fixtures: it is not a
substitute for mechanical adjustment. To reset all calibrations to their factory defaults, select
dFOF
and press [Enter]
when
SURE
is displayed, or press [MENU] to escape.
1.
Select the effect to calibrate: pan (
P
OF
), tilt (
T
OF
), dimmer/shutter (
d
OF
), cyan (
CYOF
), magenta
(
MAOF
), or yellow (
YEOF
).
2.
Calibrate the effect using the arrow keys until it matches the other units. Offsets are adjustable
from 1 to 255.
3.
Press
[
Enter
]
to save the calibration.
Kommentare zu diesen Handbüchern