Martin MAC 250+ Bedienungsanleitung PDF herunterladen (Seite 28)

28 MAC 250 Krypton/Entour

5. Remove the four Phillips screws.

6. Lift the lens module plate off the effect module.

7. Remove the three Torx 10 screws holding the lens in place.

8. Place the 14° lens between the standard lens and the plate and replace the three Torx 10 screws.

9. Perform these steps in reverse, returning the components to their correct positions and replacing all the

covers, before applying power to the fixture.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 53 54

Keine Kommentare

Martin MAC 250+ Bedienungsanleitung Seite 28