Martin MAC 250+ Bedienungsanleitung PDF herunterladen (Seite 11)

Control Panel

Demonstration program (

dEMO

)

This menu offers a preprogrammed stand-alone demonstration. Before running the demo, set the minimum and maxi-

mum pan and tilt positions (

MINP, MAXP, MINT, MAXT) to a good location for viewing the effects. Select

FOCU to focus the beam. Select GO to run the demo.

Test programs (

TEST

)

Effects test sequence (

TSEQ

)

Run a general test of all effects.

DMX log (

DMXL

)

Read the DMX start code (STCO) and DMX values received for each effect. This is an easy way to check that the

DMX start code is 0 and that the expected DMX values are received.

Quality control and service tests (

PCb

FACT

)

These menus contain tests for factory and service use.

Manual control (

MAN

)

The manual control menu permits you to do the following from the control panel:

• reset the fixture (RST)

• turn the lamp on and off (

L ON, LoFF)

• open, close, and strobe the shutter at 3 speeds (

SHUT)

• control the dimmer (

dIM)

• move the color wheel to each position and scroll it at 3 speeds (

COL)

• move the gobo wheel to each position and rotate the gobos at 3 speeds (

Rgob)

• control the focus (

FOCU)

• insert and rotate the prism (

PRIS) at 3 speeds, or, if a frost filter is installed, insert the frost (FROS)

• control pan and tilt (

PAN, TILT)

Adjustment (

AdJ

)

The adjustment menu provides the following functions:

• Reset the fixture (RST)

• Turn on and off the lamp (

L ON, LoFF)

• Disable pan/tilt feedback (

FEbA)

• Control effects in the head (

HEAd)

• Move the head to the home and extreme positions (

PATI)

• Calibrate effects (

CAL)

Head effects adjustment (

HEAd

)

The head submenu provides manual control when making mechanical adjustments, which should be performed by a

qualified technician. It allows the technician to:

• Open, close, and strobe the dimmer/shutter (

dIM)

• Move the color and gobo wheels through their positions (

COL, Rgob)

• Move the focus lens to its extreme positions (

FOCU)

• Insert and rotate the prism (

PRIS)

Calibration (

CAL

)

The calibration submenu allows you to adjust the effects to achieve total uniformity between fixtures: it is not a substi-

tute for mechanical adjustment. To reset all calibrations to their factory defaults, select

dFOF and press [ENTER]

when

SURE is displayed, or press [MENU] to escape.

Select the effect to calibrate: pan (

), tilt (

), dimmer/shutter (

), color wheel (

), rotating-

gobo wheel (

RgOF

), or focus (

FOOF

Adjust the effect using the arrow keys until it matches the other units when set at the same control

value. Offsets are adjustable from 1 to 255. Press

[

ENTER

]

to save the calibration.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Kommentare zu diesen Handbüchern

Keine Kommentare

Martin MAC 250+ Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DJ-Controller Martin MAC 250+