Martin Ego 01 Bedienungsanleitung PDF herunterladen (Seite 12)

12 Ego user manual

The separately orderable remote control unit can be used to link multiple

Egos and allows the simultaneous adjustment of their dynamics. See

“Operation with the optional remote control” on page 13 for more

information.

Adjusting the speed of effect wheel

As long as the Idle Speed dial is not in the Auto Trig zone it is used to

adjust the speed of rotation of the effects wheel/s between trigger signals.

FOCUSING THE EGO

Adjust the focus using the thumb screw next to the lens.

SELECTING THE GOBO ON AN EGO 2

There are two manually-selectable gobos in an Ego 2, one of which is

always in the optical path. One is a fixed piece of textured glass and the

other interchangeable position is delivered with an etched gobo installed.

This gobo can be removed (see “Gobo replacement or removal (Ego 2)”

on page 17).

To change the gobo that is currently in the optical path:

1 Disconnect the fixture from AC power and allow it to cool. It can take up to

15 minutes for the fixture to cool completely.

2 Remove the six access screws from the cover and lift it off. The gobo

holder is located between the lamp and the mirror dish.

3 Loosen the thumb screw on the gobo holder.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Keine Kommentare

Martin Ego 01 Bedienungsanleitung Seite 12