Martin CX-2 Bedienungsanleitung PDF herunterladen (Seite 6)

6 Lamp CX-2 user manual

AMP

The CX-2 comes from the factory with a Philips 500 hour lamp installed. This a

24V, 250W ELC halogen lamp. A high-output 50 hour lamp from Osram is also

available. Installing any other lamp may damage the fixture!

Allow the lamp to cool for at least 5 minutes before packing and moving the

fixture. To avoid possible damage, remove the lamp when shipping the fixture.

To replace the lamp

Warning! Always disconnect the

fixture from AC power

and allow the fixture to

cool for 5 minutes

before installing a new

lamp.

1 Disconnect the fixture from

AC power. If replacing a hot

lamp, allow it to cool for 5

minutes before removing the

cover. The lamp cools faster

with the cover in place.

2 Release the 4 cover locks by

turning them a quarter-turn

counterclockwise. Lift the cover straight off.

3 To remove the lamp, grasp it by the reflector and pull it out of the holder. Pull

the socket straight back off the metal pins. Do not pull the wires.

4 Push the socket fully onto the pins of the new lamp.

5 Gently push the lamp into the holder until it snaps into place.

6 Replace the top cover. To lock the 4 cover locks, turn them a quarter to a half

turn clockwise until you feel them click.

Do not overtighten

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Keine Kommentare

Martin CX-2 Bedienungsanleitung Seite 6