Martin MAC 300 Bedienungsanleitung PDF herunterladen (Seite 7)

Introduction 7

Introduction

Thank you for selecting the Martin™ MAC III Profile™. This moving-head spotlight features:

• 1500 Watt short-arc high-output Osram HTI 1500W/60/P50 discharge lamp with semi-hot restrike

• Backlit graphic display and battery power (mains power not required for fixture setup)

• Full-range mechanical dimmer with four dimming curve options, plus mechanical shutter

• Full-spectrum CMY color mixing and CTO color temperature control

• 7 interchangeable dichroic color filters

• Two gobo wheels, each with 5 interchangeable rotating gobos with 16-bit position indexing

• Interchangeable gobo animation wheel

• Interchangeable four-facet rotating prism

•Iris

• Variable focus and zoom with 3-zone zoom/focus linking system

• 540° of pan and 268° of tilt with user-settable pan/tilt limits

• Electronic “flicker-free” ballast and auto-sensing switch-mode power supply.

For the latest firmware updates, documentation, and other information about this and all Martin Professional

products, please visit the Martin website at http://www.martin.com

Comments or suggestions regarding this document may be e-mailed to service@martin.dk or posted to:

Service Department

Martin Professional A/S

Olof Palmes Allé 18

DK-8200 Aarhus N

Denmark

Unpacking

The MAC III Profile is packaged in either a cardboard box or a flightcase that is designed to protect the

product during shipment. The following items are included:

• 1500 W discharge lamp (installed)

• Two 16 AT fuses (installed)

• 2 omega brackets for clamp attachment

• This user manual

Using for the first time

Before applying power to the fixture:

• Carefully review the safety information starting on page 5.

• Check that the fuses in the Live and Neutral fuseholders near the main on/off switch match the local AC

power voltage as described in “Power input and primary fuses” on page 8.

• If necessary, install a cord cap (mains plug) on the power cable as described in “Power connection” on

page 8.

• Unlock the tilt lock as described on page 28.

• Check that the base is fastened securely so that the torque reaction when the head is panned does not

cause the fixture to move.

When powered up, check lamp alignment as described on page 10.

1 2 3 4 5 6 7 8 9 10 11 12 ... 55 56

Keine Kommentare

Martin MAC 300 Bedienungsanleitung Seite 7