Martin MAC III PERFORMANCE Bedienungsanleitung PDF herunterladen (Seite 28)

28 MAC III Performance user manual

• Whatever type of screw used, the

portion of the screw that goes into the

rear head cover must have a length of

between 12 mm (0.47 in.) and 15 mm

(0.6 in.).

• The rear head cover becomes very hot.

Ensure that handles are insulated well

enough to avoid discomfort or burn

injuries for the followspot operator.

• A handle must only be fitted after

followspot mode is enabled and tilt is

performed manually. Always remove

any handle that is fitted before

disengaging followspot mode.

Besides being constructed so that they

will not foul the yoke at any point in the tilt

range, mounting brackets must match the

dimensions shown in Figure 15.

Dimensions in Figure 15 are shown in

millimeters:

• 216.8 mm = 8.53 in.

• 230.7 mm = 9.08 in.

• 78.9 mm = 3.11 in.

Figure 15: Dimensions for followspot handles

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 71 72

Keine Kommentare

Martin MAC III PERFORMANCE Bedienungsanleitung Seite 28